Multiaxial Warp Knitting Machine

It is our new-developed and high performance warp knitting machine which adopts particular compound needle to decrease the needle resistance to weft yarn. Transmitted hook chain adopts single row hook and 2-5 layers of weft yarn can be spread. The machine adopts real time and double bus distributing mastering and chop mat device can be equipped. The chop mat can be stitched in the fabric construction. The fabric can be widely use for many industries such as wind power, spaceflight & aviation, shipbuilding, architecture and war industry etc.
Technical Parameter:
1.Needle type:Compound needle
2.Gauge:E6 E12
3.Guide bar :2
4.Nominal width:2565(101)
5.Beam diameter:762*533(30*21)
6.Let-off mechanism:EBC
7.Cutting edges mechanism:Adjustable slice mechanism
8.Drawing mechanism:Electronically draw
9.Lateral movement mechanism:Portable pattern beam
10.Winding mechanism:Independence timing constant tension winding mechanism
11.Normal working speed: 800-1000 r/min
12.Maximum winding diameter:800 mm
13.fabric layers:2-5 layers
14.Spreading weft yarn:Three spreading weft shaft, width: 4-8 inches
Spreading angle can be 40°-90° 0°/90° /±45
15.Main motor power:7.5KW
Main Performance
1.High efficiency of short stroke and crank shaft of formation motion mechanism
2.Electronic control and timing spreading weft mechanism in 20-60°
3.Enlarging width automatically technology
4.The machine has cutting edge and cutting breadth mechanism with automatic abrading cutting edge unit.
5.The machine has automatic swinging mechanism of compound needle and closing wire.
6.Big power and servo-controlled of electronic let-off and electronic draw mechanism
7.The machine has friction winding system and new-style center winding system.
8.Real-time double bus and thirteen shafts linkage control to make sure thirteen shafts and main shaft move in-phase.